參考
https://blog.csdn.net/sadanubis2008/article/details/105984422
(此篇提到一個重點，Arduino Nano本身要變成編碼器時，Programmer參數要改成AVR) ISP)
https://forum.arduino.cc/t/solved-arduinoisp-avrdude-on-linux/330626/18?u=flight1976 (若出現avrdude: stk500_disable(): unknown response=0x12錯誤時，使用此篇把serial port佔用方式可解決)
硬體
Arduino Nano x 1
ATtiny13A x1
麵包板及線材數條
先將Arduino Nano內的韌體改為ArduinoISP
操作方式為載入ArduinoISP source code (File -> Examples-> 11.ArduinoISP->ArduinoISP)
版子改成Arduino Nano (Tools->Board->Arduino AVR Boards -> Arduino Nano)
Programmer改成AVR ISP (Tools->Programmer->AVR ISP)
燒錄Arduino Nano本身的韌體
依照參考資料內的接線把Arduino Nano與ATtiny13A完成接線
重點是ATtiny13A燒錄前，Programer參數要改成Arduino as ISP(MicroCore)
Facebook Comments Box